How To: Convert Lightweight Agent to Probe

Modified on Tue, Jul 29 at 12:37 PM

Discovery Settings are required before you start the instruction below.

https://app.storylane.io/share/i7dhbb97jwhl

Table of Contents


Overview

This document covers how to convert the lightweight agent into a probe agent.


Prerequisites

Discovery Settings and Credentials are required before you start the instruction below.


Instructions

  1. Choose a company from the company selector drop-down

image-20240320-194654.png
  1. Tap the Agents module under Overview

image-20240320-194735.png
  1. Tap the three-dot Action menu and choose Map Discovery Settings and Credentials next to the agent you wish to convert to probe.

image-20240320-194929.png
  1. Select the Discovery Settings for the probe to use during it’s scan

image-20240320-195103.png
  1. Select the Credentials for the probe to use during it’s scan

image-20240320-195155.png
  1. Tap the Save button to apply your settings. The conversion process will begin automatically and generally should take 2-3 minutes to complete.

The agent must be online to complete this conversion process

Be sure to check your Scheduler (Global) and create an automatic scan job for your probe.

The probe scan should run once per day as a best practice.


Need Support?

Contact our support team by sending an email to support@connectsecure.com or by visiting our Partner Portal, where you can create, view, and manage your tickets.

https://cybercns.freshdesk.com/en/support/login

image-20240206-144508.png

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article